Plan Your WiFi Coverage Before You Drill a Single Hole

The name Wi-Fi means nothing — but a bad router position means slow internet everywhere. Here is how to map it first.

Fun fact

In 1999 the Wireless Ethernet Compatibility Alliance had a branding problem: nobody could remember “IEEE 802.11b Direct Sequence”. So they hired the brand consultancy Interbrand, which coined “Wi-Fi” — a playful nod to “hi-fi” that officially means nothing at all. The famous phrase “wireless fidelity” was just a clumsy advertising tagline that the alliance dropped after about a year. The technology behind the name was fresh too: 802.11b delivered up to 11 Mbit/s, and Vic Hayes, who chaired the IEEE 802.11 working group for ten years, became known as the “father of Wi-Fi”. A quarter of a century later, the most common home WiFi complaint is still not raw speed — it is coverage. Dark corners, thick walls, dead zones. And that is exactly the problem a coverage simulator lets you solve before you mount anything.

Tool usage guide

  1. Open the WiFi Coverage Simulator and draw your floor plan, including interior walls.
  2. Place the router where you plan to mount it — the signal heatmap updates instantly.
  3. Add mesh nodes or repeaters into the red zones and compare the results.
  4. Compare the 2.4 GHz and 5 GHz bands, then lock in final positions before drilling.

Try the tool

WiFi Coverage Simulator →

Further reading

Wi-Fi — Wikipedia article